Wheels are Build & Finished by hand in Belgium.
Inspected and tested by us for you.
Within all safety margins, these rims and wheels are an excellent choice for any XC race.
MORE STIFFNESS & STRENGTH
The Rims have been manufactured with a single joint from a one single piece of carbon.
While cheaper rims have 2 or 3 joints with several pieces of carbon.
This single joint and carbon layer gives an overall better strength to the rim and a lower weight.
STRONGER THAN BEFORE
Every rim gets a stress test, because these rims are very low in weight we needed to reinforce the nipples entrees to insure the quality.
SMALL BUT SIGNIFICANT CHANGES
With the support of our factory we were able to do some small but significant changes to the hubs. This resulted in a 10procent lower weight per hub and more durability than the generation one hubs.
Wheelset RATHEBERG 30: UD finish, 30mm internal, 1185gr +- 1%
Ceramic bearing set: -10gram*
Titanium spokes: -58gram**
Ceramic + Titanium: -68gram
OUTER WIDTH: 35mm
INNER WIDTH: 30mm
SPOKE DIA HOLE: 4.5mm for external nipple
SPOKE HOLE: 28H
ASSEMBLY HOLE DIA: 7mm
MAX TYRE PRESSURE: 60psi
MIN TYRE PRESSURE: 25-40psi
MAX SPOKE TENSION: 114kgf
MAXIMUM RIDER WEIGHT: 100kg
HUB: Berg Boost Hub with XD Sram Freebody or Shimano
BEARING: Hybrid Ceramic abec-7 or Steel
SPOKES: SAPIM CX-RAY 300MM (Flat Spokes) (4,3gram)
SPOKES: MAX ELITE Titanium 300MM (Flat Spokes) (3,0gram)*
RIMS: Asymmetric 2mm offset
MIN/MAX TYRE WIDTH
inner 30mm -> 2.20" - 2.70"
* Only on demand