Lightweight carbon racing wheelset,
the berg rims have several key features, a reinforced spoke bed for nipple entry, single carbon joint for strength but also a reduced rim profile height these are better for several major reasons;
Optional Ceramic Bearings are available for the hubs.
Standard logo color is gloss black
Wheelset RATHEBERG 30 295G: UD finish, 30mm internal, 1185gr +- 1%
Wheelset RATHEBERG 30 280G: UD finish, 30mm internal, 1155gr +- 1%
RIM DECAL: Standard Gloss Black
OUTER WIDTH: 35mm
INNER WIDTH: 30mm
SPOKE DIA HOLE: 4.5mm for external nipple
SPOKE HOLE: 28H
ASSEMBLY HOLE DIA: 7mm
MAX TYRE PRESSURE: 60psi
MIN TYRE PRESSURE: 25-40psi
MAX SPOKE TENSION: 114kgf
MAXIMUM RIDER WEIGHT: 100kg (295g)/80kg (280g)
STANDARD HUB: Berg Boost Hub with XD Sram Freebody
OPTIONAL: Shimano Microspline 12 speed*
STANDARD BEARING: SKF
STANDARD: SAPIM CX-RAY 302MM (Flat Spokes) (4,3gram)
RIMS: Assymetric 2mm offset
MIN/MAX TYRE WIDTH
inner 30mm -> 2.2" - 2.70"
RECOMMENDED VALVE LENGTH
* (Contact us for availablity)
BERG offers a warranty of 2 years from the purchase date of our products. We are sure that you appreciate that warranty and can only be claimed if you present the invoice of the purchase parts. Please return the defective part.
The warranty covers defects of materials, it does not include damage due to normal wear and tear, improper use of non-compliance with the instructions. The warranty does not include liability for damages, in particular, for indirect damage as a consequence of accident, other indirect damage or consequential damage.
See for more information about warranty HERE
WEAVE: Uni Directional
MATERIAL: Full Carbon Wheel manufactured by hand, small difference in weight is normal +- 2%.
PURPOSE: Marathon and Cross-country. All-mountain, Enduro, freeride or downhill are not intended uses.
IN USE: Check the Rim on a regular basis, inspect the Rim for wear and tear, please inform us if any wear appears.
TESTED: ISO 4210-7 approved
MUC-OFF Ultimate Tubeless Setup Kit DH | 44mm valve
The MUC-OFF Ultimate Tubeless kit contains everything you need to setup a tubeless-capable wheelset and make it ready to drive. Each kit contains a tubeless rim tape, sealing patches, two CNC machined black tubeless valves and two bags of No Puncture Hassle Tubeless Sealent.
2 x Sealing milk Hassle no Puncture | 140 ml
1 x rimtape tubeless 30 mm x 10 m
2 x tubeless valve 44 mm